Xmas Tree: First attempt at engraving and cutting out. Cast acrylic 4.4mm, engraving: 60 degree V-bit & DOC 0.002", cutout: 1/4" straight bit & DPP 3mm

CA map cutout with bear engraving

Om Mandala: Engraving and cutting out. Cast acrylic 4.4mm, engraving: 60 degree V-bit & DOC 0.002", cutout: 1/4" straight bit & DPP 3mm

Sai Baba: Cast acrylic 4.4mm, engraving: 60 degree V-bit & DOC 0.002"

Lord Ganesha: First attempt at engraving. Cast acrylic 4.4mm, engraving: 60 degree V-bit & DOC 0.002"

First hardwood (oak) project with multiple layers glued together to create 3 blanks, then all glued together, carved, and sprayed poly

Took the cutout sign and the 'waste' it was cut out from, made a box with it and installed remote-controlled LED strip inside. Works great as a night light!

Pumpkin-shaped carving and cutout for my neighborhood pumpkin decoration contest: Pumpkin painted by my talented artist neighbor. 1/2" ply, 60 degree V-bit, used Orafilm for spray-painting in carving.

Serving bowl, redwood, 90 degree V-bit detail, shellac sprayed

Fruit bowl ~12" dia (1/8" up-down bit, 1/4" basic plywood with sanding, poly spray and superglue)

First full cut-out sign ~14" wide (1/2" pine. 1/8" up-down bit)

Clamps for holding down CNC material: 1/2" ply, 1/8" compression bit

Box: 5" x 4" x 3" with lid partially open (1/2" pine. 1/8" up-down bit)

DWS logo with white paint dry-rolled on (just to try out the look.) Designed the logo including converting picture to lines, curved text, and concave corner border (3/4" MDF. 90 degree V-bit)

First simple engraving - simple text ~12" long (3/4" MDF. 90 degree V-bit)